1769-It6 6 Channel for a/B PLC Input Module Programmable Controller Module PLC

• Customization: Available
• Application: High-performance Transducer, Three Phase Transducer, General Transducer, Single-phase Transducer, High Frequency Converter Transducer
• Output Type: Triple
• Model NO.: 1769-IT6
• Principle of Work: PLC Control
• Switch Mode: High Carrier Frequency PWM Control
• Main Circuit Type: Voltage
• Voltage of Power Supply: High Voltage Variable-Frequency Drive
• Link of Transformation: AC-DC-AC Variable-Frequency Drive
• Nature of DC Power: Voltage Variable-Frequency Drive
• Function: Simple Type, Elevator Special, Textile Special, Constant Torque Universal Type
• Transport Package: Box
• Specification: null
• Trademark: null
• Origin: Null

Product Description

The 1769-IT6 Compact Input Module has 6 input channels plus 2 CJC sensors. It has a Delta Sigma converter type and its response speed per channel is input filter and configuration dependent. It communicates with the controller via the bus interface where it also receives power from the 5-24V DC system power supply. The 1769-IT6 module draws a maximum current of 100 mA at 5 Volts DC, and 40 mA at 24 Volts DC. Upon powerup and when a channel is enabled, this input module performs auto-calibration. Auto-calibration can also be programmed to run every five minutes. The 1769-IT6 is UL 508 listed, C-UL certified (under CSA C22.2 No. 142), and CE compliant for applicable directives. It can be attached to an adjacent I/O module or to the controller before or after (single module replacement) mounting. To reduce electrical noise, install this measurement device at least two slots away from an AC power supply. When mounting, maintain a minimum spacing clearance of two inches on all sides for adequate ventilation.

Product Family:	Compact I/O Modules
Part Number:	1769- IT6
No. of Inputs:	6
Compatible Adapters:	1769-ADN (DeviceNet); 1769-AENTR (Ethernet)
Sensors supported:	J, K, T, E, R, N, S, B, N, C, CJC,
millivolt signal:	+/- 50mV and +/-10mV
Current draw @ 5.1V:	100 mA
Current draw @ 24V:	40 mA
Heat dissipation, max:	1.5W
Nonlinearity:	±0.03%
Calibration:	Performed during power-up; programmable
CJC sensor accuracy:	±0.3 °C (±0.54 °F)
CJC accuracy:	±1.0 °C (±1.8 °F)
Power Supply Distance Rating:	8 modules
Part Number/Catalog No.	1769-IT6
Product Line	CompactLogix
Module Type	Thermocouple Module
Input Type	Thermocouple
Communication Cable	6 Point
Shipping Weight	2 lbs.
Shipping Dimensions	8 x 8 x 5 in.
Series	A and B
Converter Type	Delta Sigma
Replacement Door Label Part Number	1769-RL2 series B
Replacement Terminal Block Part Number	1769-RTBN18
Wire Type	Copper-90 degrees Celsius
Wire Size (Solid)	22-14 AWG