Customization: | Available |
---|---|
Application: | Machine Tool |
Speed: | Constant Speed |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
The MPL-B230P-EJ72AA has an output power rating of 0.86 kW, continuous stall Torque of rating of 2.1 N-m with a maximum operating speed of 5000 revolutions per minute (rpm). As a feedback device, this servo motor is pre-installed with a 128 sin/cos, absolute single-turn encoder that utilizes Hiperface protocol.
As optional additions, the MPL-B230P-EJ72AA may be installed with a 24VDC holding brake, keyless shaft and a shaft seal. Aside from protection to contaminants from making direct contact to the internal parts of the servo motor, the shaft seal increases the protection rating of the servo motor. As standard, the motor is provided without a shaft seal with equivalent protection of IP55. When installed with an appropriate shaft seal, the environmental rating meets IP66 requirement.
The MPL-B230P-EJ72AA drive should not be lifted or handled by the motor shaft. Doing so can cause personal injury or damage the drive. The MPL-B230P-EJ72AA drive requires a relative humidity range of 5 to 95%, non-condensing. The drive should be operated in an environment where the temperature range is from 0 degrees Celsius to 40 degrees Celsius. While powered down or in storage, the ambient temperature should be from -30 to 70 degrees Celsius. When it is in storage, the MPL-B230P-EJ72AA drive should be in a non-corrosive environment. The MPL-B230P-EJ72AA drive should be shielded to protect the motor housing. The users should inspect the motor on a regular basis for notable signs of damage. If there is excessive wear, ensure that the drive is replaced. The MPL-B230P-EJ72AA drive comes with the aluminum housing and it has a shock resistance rating of 20 G peak.
Frame Size | 2 = 75 mm |
---|---|
Part Number/Catalog No. | MPL-B230P-EJ72AA |
Product Family | MP Series Low Inertia servo motors |
Voltage | 400VAC |
Torque Rating | 2.1 NM |
Rated Power | 0.86 kW |
Encoder | 128 sin/cos, absolute single-turn encoder (Hiperface protocol) |
Stack Length | 76.2 mm (3.0 in.) |
Mounting Holes | Type FF |
Compatible Servo Drives | Kinetix 5500, Kinetix 5700, Kinetix 6200/6500,Kinetix 6000, Kinetix 300/350, Kinetix 2000, Kinetix 7000 |
Compatible Applications | Packaging, Converting, Material handling, Electronic assembly, Automotive |
Connection: | Circular (SpeedTec) DIN connector, right angle, 180° rotatable |
Series | Premium permanent magnet rotary servo motor |
Series Type | Low inertia |
Voltage Class | 400 Volts |
Magnetic Stack Length | 3 inches |
Rated Speed | 5000 RPM |
Feedback | Single-turn high-resolution encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular DIN, right angle, 180 degrees rotatable |
Mounting Flange | IEC metric |
Factory Designated Options | Standard |