Customization: | Available |
---|---|
Task: | Adjust |
Structure: | Combination |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
The 1756-EN2T supports 10 to 100 Mbps EtherNet/IP communication rates and uses Twisted pair copper media. It supports 256 Logix and 128 TCP/IP communication connections. It can support a maximum of 8 axes for integrated motion on the Ethernet/IP Network and draws 1 A current at 5.1 Volts DC. It has a maximum power dissipation of 5.1 Watts and thermal dissipation of 17.4 BTU/hour. It can be installed in any slot in the ControlLogix Chassis. For wiring, it uses unshielded RJ45, category 5, twisted-pair cable connectors to interface with the controller. To operate an EtherNet/IP network, parameters such as an IP address, Subnet masks, Gateway, etc. must be defined. The 1756-EN2T bridge has various functions like providing support for messaging, distributed I/O, and tags. It encapsulates messages within standard TCP/IP protocol. ControlNet and DeviceNet network protocols allow it to share a common application layer. It does not require any scheduling or routing table to store information. Other features include a protected mode, an electronic keying, a device level ring network, and a parallel redundancy protocol network support.
Part Number/Catalog No. | 1756-EN2T |
---|---|
Series | ControlLogix |
Product Type | Ethernet Communication Module |
Ethernet-IP Communication Rate | 10/100 Mbps |
Insulation Voltage | 30 Volts Continuous |
Integrated Ports | One (1) RJ45; One (1) USB 1.1 |
Current Draw | 1 Amp |
Location | Chassis (any slot) |
Current Rating | 1.2 Amps |
Slot Width | 1 |
Operating Temperature | 32 to 140 degrees Fahrenheit (0 to 60 degrees Celsius) |
UPC | 10612598329103 |
Power Dissipation | 6.2 W |